Share:

MITCHEL MILL RD. over MITCHELL MILL

Map

Coordinates:
+37.83190, -77.16395
37°49'55" N, 77°09'50" W

Facts

Source: National Bridge Inventory. Information not verified; use at your own risk.
Name:MITCHEL MILL RD. over MITCHELL MILL
Structure number:000000000010659
Location:3.1M RTE 608-0.4M RTE 609
Purpose:Carries highway over waterway
Route classification:Local (Rural) [09]
Length of largest span:38.1 ft. [11.6 m]
Total length:40.0 ft. [12.2 m]
Roadway width between curbs:14.1 ft. [4.3 m]
Deck width edge-to-edge:15.4 ft. [4.7 m]
Owner:State Highway Agency [01]
Year built:1932
Historic significance:Bridge is not eligible for the National Register of Historic Places [5]
Design load:MS 18+Mod / HS 20+Mod [6]
Main span material:Steel [3]
Main span design:Stringer/Multi-beam or girder [02]
Deck type:Wood or Timber [8]

Latest Available Inspection: March 2017

Good/Fair/Poor Condition:Fair
Status:Open, no restriction [A]
Average daily traffic:28 [as of 2014]
Deck condition:Good [7 out of 9]
Superstructure condition:Very Good [8 out of 9]
Substructure condition:Fair [5 out of 9]
Structural appraisal:Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Deck geometry appraisal:Equal to present minimum criteria [6]
Water adequacy appraisal:Better than present minimum criteria [7]
Roadway alignment appraisal:Equal to present desirable criteria [8]
Channel protection:Bank protection is in need of minor repairs. River control devices and embankment protection have a little minor damage. Banks and/or channel have minor amounts of drift. [7]
Scour condition:Bridge foundations determined to be stable for assessed or calculated scour condition. [5]
Sufficiency rating:71.0
Recommended work:Other structural work, including hydraulic replacements. [38]
Estimated cost of work:$70,000

Previous Inspections

DateConditionDeckSuperstructureSubstructureADTSuff. Rating
March 2017FairGoodVery GoodFair2871.0
March 2015GoodVery GoodVery GoodGood1782.0
April 2013PoorPoorPoorGood1752.0